[HamWAN PSDR] Yakima County Mesh
chad at verishare.net
Thu Apr 6 15:22:29 PDT 2017
@Bart All we have currently is a shared google map with node locations.
On Thu, Apr 6, 2017 at 1:55 PM, Bart Kus <me at bartk.us> wrote:
> Hi Chad,
> Can you share your list of nodes (GPS locations)? That would help with
> interconnect planning. Ours is published on our website.
> On 4/6/2017 1:42 PM, Tom Hayward wrote:
>> Hi Chad,
>> There are HamWAN users in Spokane and on the west side. We are very
>> eager to bridge that gap.
>> Jim K7LL is in Pullman and looking to link toward Spokane and Walla Walla.
>> To directly connect your network with HamWAN, you will need to use
>> public address space. You can get these addresses from AMPR if you
>> need (http://www.ampr.org/). What address space are you using
>> currently? HamWAN filters private address space from its routing
>> table, because it's assumed to be an accidental leak from someone's
>> home LAN. However, you could NAT or tunnel if you had to pass traffic
>> from a private network over HamWAN.
>> Tom KD7LXL
>> On Thu, Apr 6, 2017 at 12:49 PM, Chad Smith <chad at verishare.net> wrote:
>>> Greetings. Here in Yakima we use the AREDN.ORG firmware with Ubiquiti
>>> on 2397Mhz. I realize the HamWan is a different beast, however we are
>>> looking at expanding our network. Currently we are just in Yakima, Selah
>>> getting into the lower valley toward tri-cities. There is also a tunnel
>>> the Walla Walla mesh network. I would like to open a dialog with you
>>> about possible future expansion state wide as well and advise on updating
>>> out network.
>>> Chad Smith
>>> Node Map
>>> Facebook Group
>>> PSDR mailing list
>>> PSDR at hamwan.org
>> PSDR mailing list
>> PSDR at hamwan.org
> PSDR mailing list
> PSDR at hamwan.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the PSDR